Raspberry Pi Touch Screen Mounter for Sovol SV06
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Touch Screen Mounter for Sovol SV06, that you may need, if you want to use Klipper
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 0
- Views
- 266
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello there,
If you're looking to mount a Raspberry Pi with a touch screen on your printer, here's my approach.
I aimed to avoid increasing the width of the printer due to space constraints, so I positioned it at the front.
The mounts are affixed using four new M4 x 15mm screws in the same locations as those securing the Sovol front coverplate. The screen itself is fastened with four M3 screws onto the mount.
The screen is positioned to ensure it doesn't come into contact with the ground or the heated plate.
You will need:
- 4 x M4 x 15mm screws
- 4 x M3 x 8mm screws