RC car shock absorber fully printed #3
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.79 – €0.96 net (excluding VAT)
For file: SA V3RF_0.2mm_PLA_MK3S_1h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.87 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 1.11 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the retrofit version ; it should be compatible with my Unimog and RC car design
- Rating
- 5 / 5
- Likes
- 66
- Downloads
- 442
- Makes
- 3
- Views
- 2,644
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
28/02/24: Found a bug ! You need to use the new files…
I also improved the overall rigidity by adding a PLA slide.
TPU spring printing: I'm providing a “color change” in the print file; start with PLA (less than 1 mn) then put TPU. This way it's less messy (no paper glue that needs to bee cleaned afterwards) and you don't need to protect the buildplate.
The retrofit is done by adding 2 small spacers instead of having 2 separate designs.
-------------------------------------------
In order to build a Mc Pherson strut suspension I needed a new shock absorber !
This is a retrofit part that is compatible with my Unimog RC design and my RC car V2 design.
It uses a TPU spring that is enclosed in a PLA tube. The creep is quite natural.
The final part for the new suspension will most certainly need some additional work.