Miter Clamping Jig (Gehrungsleimhilfe)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.55 – €1.90 net (excluding VAT)
For file: Miter Clamping Jig_0.2mm_PETG_MINI_1h44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.72 excluding VAT (range midpoint).
- Weight reported by the author
- 23 g
- Print time reported by the author
- 1.73 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This jig helps to clamp and glue miters
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 99
- Makes
- 2
- Views
- 565
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This jig helps to clamp and glue miters at different angles (not only 45° angles). You need three clamps and two jigs to apply the jigs to one corner/miter.
To prevent from slipping while clamping, I recommend to apply sand paper with grain size 400 to the backside by using double sided tape. The sand paper will provide enough friction to prevent slipping and the fine grain size will not create any scratches on your wood.
Attributions
The jigs are inspired from the following YouTube video by Jonas Winkler (German). You can see in the video how to apply them. I however created the model from scratch and the dimensions might vary compared to the video.