1 / 3
Foldable Clothes Hanger for Travel - Print in place — image 1
1 / 3

Foldable Clothes Hanger for Travel - Print in place

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Print in place foldable travel hanger

Rating
4 / 5
Likes
99
Downloads
477
Makes
3
Views
1,573
Reviews
1

Updated at source:

Model information

Category
Bedroom
License
Creative Commons — Attribution — Noncommercial — Share Alike

Simple foldable travel hanger. Print in place, no support, no required hardware, no assembly.

Print Settings : It is REQUIRED to put additional external perimeters:

  • 0.4mm Nozzle : Perimeter = 4 
  • 0.5, 0.6mm Nozzle : Perimeter = 3

High quality PLA (PLA+, Tough PLA) and PETG both works.

There is 5 model, from 0.1mm to 0.5mm of tolerance in the joints:

  • 0.1mm, is generally too tight, the joint is welded together on most printer
  • 0.2mm, the joint can move but is gritty on most printer, use only with a well tuned printer
  • 0.3mm RECOMMENDED, feel solid with fluid movement when printed on my Prusa MK4
  • 0.4mm, move easily but is loose. This may be the best file to print with an inconsistent filament
  • 0.5mm, the joint is generally too loose but still work

You can print a tolerance test to make sure you pick the correct model. The tolerance test is only 3g of filament. The print in place hanger use 50g of filament. You can leave comments, suggestions and questions, I will maintain this model.

This model is free. If you wish to tip me or support me, you can do so at this link: https://www.printables.com/model/773888-infinity-calander

Tags