Soap Dispenser Pump Limiter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.04 – €0.05 net (excluding VAT)
For file: limiter_0.4n_0.2mm_PLA_MINIIS_2m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.05 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Restriction ring to limit the amount of soap dispensed in a single push of the pump
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 30
- Makes
- 2
- Views
- 189
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
I was annoyed by soap dispensers giving me about 10000x more soap than what any reasonable person needs to wash their hands, so I decided to limit the pump travel distance.
Snap multiple restriction rings onto the soap dispenser pump (see photo) to limit the amount of soap dispensed in a single push. One ring is 2 mm tall, but you can easily resize along the Z axis in the slicer. I just found it easiest to print multiple 2mm rings and gradually add them until I was satisfied (I did have to use one 1 mm ring).
This ring is for 15 mm pump diameter, let me know in case you need other diameters.
Print with 3 perimeters to avoid infills.