1 / 6
ImbaBrix (Giant interlocking bricks)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are giant bricks! (Dont use the L word with GO at the end) Germans would say: Riesen Klemmbaustein!
- Rating
- 5 / 5
- Likes
- 200
- Downloads
- 543
- Makes
- 3
- Views
- 2,274
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These are giant bricks. I dont think I have to explain more!
For reference the regular 4-pin brick is 160*160*100 mm.
My "max" speed" to settings:
- Layer height: 0.28 mm
- Infill: 7% Grid or 5% gyroid
- Perimeters: 2
- Top layer: 4
- Bottom Layer: 2
For the “cover” stones I recommend at least 12% infill, 3 perimeters and 0,2mm layer height! Otherwise they will “crunch” alot. ;)
Dont mix materials (e.g. some stone ABS some PLA) as they have different shrinking behaviour and this will screw with the tolerances.
Update 25.04.24: Added 2x4 brick