Lethal Company An Error Occured! Sign

A carefully traced, multilayered sign featuring one of the most common connection errors in the game Lethal Company! 

I printed this at a 0.12mm layer height, but more typical layer heights like 0.16 and 0.20 could also work, just be careful with your layer changes.

I use a Bambu X1C but don't have a fancy AMS, this can be printed on any normal FDM printer that allows you to pause during printing! Simply add a pause at the three different “layer changes”. For me, at 0.12mm layer height, this is at layers 25 and 36.

Layer Height: 0.12mm (optional)

Infill: 15% Grid (optional)

Brim: 8 lines (recommended, for the sharp corners on the model)

Supports: None

Be warned - A finely tuned printer may be required, the lettering is traced exactly from a screenshot, with the [Back] just slightly bigger, because the lines on a 0.4mm nozzle will be exactly 1 pass thick. Scaling the model up can make this easier, but then warping/curling will be the challenge.