Time Lapse Clock Holder for Bambu Lab X1 Carbon
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Allows mounting of clocks inside a Bambu Lab so that time lapses can give a better idea of time taken.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Allows mounting of clocks inside a Bambu Lab so that time lapses can give a better idea of time taken by the print.
The bracket mounts on a ledge that is on the opposite side of the camera. It had to be set in such a way that the clocks is beneath the build plate level at the start of a print, otherwise the LIDAR sensor on the tool head would crash into it.
This is the type of clock I used:
https://www.aliexpress.com/item/1005006012121654.html
Can be mounted using a 8x2mm cylindrical magnet or simply using double sided tape.