Velux roof window hook accessory
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.15 – €0.18 net (excluding VAT)
For file: Velux_Pin_0.2mm_PLA_MINI_13m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.16 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 12.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
If you're just a bit to short to open/close the Velux roof windows then this is the accessory for you!
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 126
- Makes
- 0
- Views
- 949
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
If you're just a bit too short then just use the hook.
Otherwise add the converter and one or two sticks to get the wanted length.
The sticks may break so use at least 50% infill I think. The same for the hook.
I have had both PETG and PLA. PLA seems to do best. Broke one PETG hook!