Benchy's Jolly Roger - Pirate Flag
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As an addition for the 3D Benchy, I designed a tiny pirate flag.
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 140
- Makes
- 2
- Views
- 656
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Print the flag halves flat and add a color change before the skull starts. When finished, glue the two halves together so you have the skull on both sides.
With a 0.2 mm nozzle, the resolution is much better. The one in the picture I printed with 0.4 mm.
The flag pole is printable but very flimsy. I printed it with a brim to keep it stable and adhered to the print bed. Print it upside down because there is a slight chamfer on one end!
Alternatively you could use a 1,5 mm metal or wood rod or a toothpick or whatever fits.
Finally combine (glue) the flag to the flag pole and you're done :)
If you want to cut the model yourself, there is a complete one-part-model aswell.
Arrrrrr, Happy Printing!
Credit to the SVG skull tempate I used (unmodified): File:One Piece Jolly Roger.svg - Wikimedia Commons
