Sealing for Alveo3D HEPA Housing for Bambu Lab X1C by Fisherman
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the missing air seal for the Alveo3D HEPA Housing for Bambu Lab X1C by Fisherman.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A tight, sealed fit of the housing (AMS-fitting version by @Fisherman_639110, remix of @MattRayner_748233) is essential for the HEPA and activated carbon filter to work efficiently. This additional sealing part aims at closing the gap between the housing of the filter and the back panel of the printer resulting in minimized air leakage.
It even allows to bridge the small gap resulting by one screw, by pushing the magnet in this position deep into the housing while placing the other magnets almost flush to the sealing's surface.
I recommend printing this part using PEBA filament (e. g. by KIMYA), as this is probably the most rubber-like material available for 3D-printing as well as being quite chemical and heat resistant.