Full / Empty Flag for Trash Can / Recycle Bin / Waste Bin
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.39 – €1.70 net (excluding VAT)
For file: Trash Can-Flag_0.2mm_PETG_MK3S_1h40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.54 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.66 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Snap this part on your trash can handle to indicate if it has been empty.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 297
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model fits on the center of the handle and straddles the septum. There is no glue required; however, organic supports are necessary during printing. Printing the part as shown with PETG will allow the part to flex and fit around the handle without breaking. Set the vertical wall perimeter to 10 to make sure the part will be filled in a direction to support the flexing. The FreeCAD parametric model is included if there is need to change the flag length or handle diameter (33mm default).
After putting the trash can on the curb, flip the flag up. When the can is emptied, the flag will fall down.
If your bin does not have a septum or you do not want to use supports, another universal flag is available here https://www.printables.com/model/771018-universal-full-empty-flag-for-trash-can-recycle-bi