1 / 1
Juki MO-104 Spool Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement Spool Holder for a Juki MO-104 Serger/Overlocker
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 32
- Makes
- 0
- Views
- 341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Replacement spoolholder for a Juki MO-104 serger/Overlocker.
Spool Rod attaches to base with a m3 nut and bolt (I used a 12mm bolt but up to 16mm should be ok, probably no less.
Spool Adapters were printed using TPU and will fit on the stock spool rods.
Leave a comment if you have any questions!