1 / 6
Rugged Case for Raspberry PI — image 1
1 / 6

Rugged Case for Raspberry PI

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a case I've designed to put my Raspberry PI (4, 3 or Zero 2 W) outside .

Rating
0 / 5
Likes
8
Downloads
67
Makes
0
Views
898
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial — Share Alike

I've designed this case put it outside with my Raspberry PI Zero 2 W running a Machine Learning model to discovery the cat that's making my garden its toilet. 

It takes inspiration from the NatureBytes case - that I love - but it is not the same. 

It has support for a tripod so it can stand. On the back there's space for a 10400 mAh battery. On the front, holes for a Adafruit 1000c power boost, and 2 types of Raspberry PI. 

The cover has a hole for a camera and support to screw it in place. You can use a plastic dome to protect the camera from the elements.  The diameter should be between 38/40mm

To assemble it:

  • Print all the parts. I've printed them with ABS. 
  • The seal should be printed with flexible filament. 
  • Use 4x M5x35mm Allen screws to screw the cover and the bottom. 
  • Print 2x latch .

Use threaded inserts to secure the screws. 

  • 4x M2x3.6mm for the camera
  • 4x M3x4.8mm to secure the screws for the RPi support 
  • 1x M6x12.7mm to secure the tripod.

Use nylon (or brass) M2.5 hex spacer standoffs for the Raspberry PI's and Adafruit's power boost 1000c. 

In the spacer hole, you can fit a 14mm diameter round button. 

On the back, there's a hole inside a square that you can glue a rubber square and have some wires passing there from/to outside protected. 

 

I've printed it using ABS, but PET-G should also be enough to withstand the outdoors. 

I've designed it using FreeCAD on Linux. 

Tags