1 / 2
PrusaXL_Extruder WHA/PTFE Inline-Clips
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PrusaXL_Extruder WHA/PTFE Inline-Clips
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 32
- Makes
- 0
- Views
- 248
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
PrusaXL_Extruder WHA/PTFE Inline-Clips
Snap-In design, two pieces only.
Designed to keep the wires and the PTFE tube within the guiding spring width.
Should help reducing the tangle between the different tools.
Update:
Following some testing i discovered that disconnecting the PTFE tube from the two clips closer to the extruder, considerably reduces the strain and allows for larger PTFE tube bends(radii) as the extruder moves further form its parking spot. I will follow up with a Cable only Clip; although is not critical unless you pay attention to aesthetics.