Crux3 1s Battery Mount (2025 UPDATE)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crux3 1s battery mount designed to be printed without supports in 3 parts. Should fit 1s 450 - 850mah cells.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 192
- Makes
- 0
- Views
- 821
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
1-24-2025 UPDATE: I have uploaded a version 2 that only requires you print the file twice, no need for 3 pieces or supports. Weight of each piece comes in around 0.55g, so 1.1 grams for a mount that accommodates a fairly large range of cell sizes. The photo with greenish yellow TPU is version 2, dark blue is version 1. For printing version 2, 3-4 perimeters, and 0.2 - 0.25mm layer height should be fine, no supports or brim needed. You will need to trim the little “mouse” ears from the mounts two arms first layer.
V1:
Crux3 1s battery mount that weighs about 1 gram. Designed to be printed without supports in 3 parts. Should fit 1s 450 - 850mah cells. Print in 0.4mm line width and 3 perimeters. I went with 0.2mm layer height.
Print 2 of the mounts and one spacer. No need to mirror.