1 / 8
Plate/Tablet Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A plate/tablet stand with stabilizers, there are two versions one you Glue and the other using M3 Screws, if it is too…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 481
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
A plate/tablet stand with stabilizers, there are two versions one you Glue and the other using M3 Screws, if it is too big I have also printed at 80% and you can still tap the M3 screws.
NOTE: it will work as a tablet stand but be careful it will slide out (if knocked) if the tablet is not in a case.
I used 3 perimeters and 15% infill
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
No
Supports:
No
0.28
Infill:
15
Filament:
Any PLA Any
Category: Household