Raspberry Pi 4 Case for Pi 7" Display and Ice-Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi 4 Case for use with the Pi 7" Display and Ice-Tower W/ Noctua Fan.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 92
- Makes
- 0
- Views
- 663
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of the “Raspberry Pi 7 Inch Touchscreen display case” created by luc.e here on Printables.
The "raspi7inch_front" and “raspi7inch_sd_hatch” will still be needed from the original posting. If you are not using the ice-tower cooler, you will want to use the “raspi7inch_lid” also. The ice-tower's original fan will work with the lid remix, but will have a larger gap because it is not as deep.
The Noctua fan used for this project was the Noctua NF-A4x20 5V.
For my print I used overture PETG on my Bambu Labs P1S using .2 layer height.
Supports are recommended for the case only.