Prusa Mini Base - Camera Arm support
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An for Prusa Mini Base with a camera support arm. The new insert also has a slot for the for the RPi camera cable.
- Rating
- 4.857 / 5
- Likes
- 78
- Downloads
- 210
- Makes
- 7
- Views
- 3,448
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After modding my Prusa Mini with the Prusa Mini Base by David Warboss I wanted a integrate my RPi camera mount. The RPi camera mount I used in the past was by Seabird HH. I liked it because it was simple to print, did not add any weight to the motors on the Mini and was adjustable. I also added the Raspberry Pi Z-Box by The Freewheeler, for OctoPi, so I knew I would not need the usb storage option on the front of my Mini. I relocated the USB storage to the right rear of the base for USB storage.
The insert was re-mixed in Fusion 360 and the camera support arm was also designed in Fusion 360.
Printing is pretty straight forward, I just printed everything base of what I had printed the Mini base on which was 0.15mm layer height with a 0.4mm nozzle. Using Prusa Slicer defualt 0.15mm quality it takes ~ 2.5 hours to print.
When it is all printed I secured the camera support arm to the insert with 1 M3 x 12mm socket cap screw. The hole may be a bit tight, but it fits together nicely. A RPi camera cable of 1m will work fine if you are using the Raspberry Pi Z-box. You will even be able to do a bit of cable management along the way using the other inserts in the Mini Base legs.
Prusa Mini Base - https://www.prusaprinters.org/prints/63483-prusa-mini-base
Raspberry Pi Z-box (3B/3B+) - https://www.prusaprinters.org/prints/68894-raspberry-pi-z-box-integrated-3b3b-case-for-prusa-
Prusa Mini Raspberry Pi Camera Mount - https://www.prusaprinters.org/prints/31750-prusa-mini-raspberry-pi-camera-mount-by-clip-faste
Print instructions
Printer brand:
Prusa
Printer:
Prusa Mini+
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.15 - 0.20
Infill:
15 - 20%
Filament_brand:
Sandoz 3D
Filament_color:
Orange
Filament_material:
PLA+