Kingroon KP3s Pro- LCD TFT RPi GPIO Raspberry pi Zero 2w
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Kingroon KP3s Pro - LCD TFT RPi GPIO Raspberry pi Zero 2w
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 72
- Makes
- 0
- Views
- 1,162
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Kingroon KP3s Pro - LCD TFT RPi GPIO Raspberry pi Zero 2w
This design has been created to place a raspberry tft with klipperscreen in our kp3s Pro.
NOTE: This is only compatibility with raspberry pi zero 2w or another model with the same dimensions.
You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to donate
Commercial components
- 1 unit - LCD TFT RPi GPIO 3.5" Raspberry
- 6 units - Heat inserts M3xD4.6xL4.0
- 6 units - Screw DIN 912 M3x8
Optional
- 1 unit - Aluminum case raspberry pi zero
- 1 unit – Kit soldering iron for heat insert nuts (Optional)
Printing
The printing part are designed to 0.4 nozzle, Infill should not be less than 20%, recomended 25- 30%
The stl are shared in the correct position for best printing without supports
Heat Inserts
- 6 units - Heat inserts M3xD4.6xL4.0
![]() | ![]() |
Assembly instructions
1. Remove the old TFT screen and install the base of new TFT with the same screws
- 1 unit - base_lcd_pro.stl

2. Assemble the TFT case
- 1 unit - LCD TFT RPi GPIO 3.5" Raspberry
- 4 units - Screw DIN 912 M3x8
- 1 unit - front_lcd.stl
- 1 unit - back_lcd_pro.stl

3. Fix the TFT to the printer base
- 2 units - Screw DIN 912 M3x8

4. Connect the raspberry to the TFT

5. LCD Installation
Resource: http://www.lcdwiki.com/3.5inch_RPi_Display
Open terminal(SSH) and install the driver on RaspberryPi
sudo rm -rf LCD-show
git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/
sudo ./LCD35-showWait A Few Minutes, when the system reboot ok, you can see that.
Rotate the display, execute the following command:
cd LCD-show/
sudo ./rotate.sh 905. Installing Klipper Screen
Resource: https://klipperscreen.readthedocs.io/en/latest/Installation/
The purchase links are affiliate links. If you buy through them you can help me continue creating designs. Thank you

