1 / 4
Guide PC210 Thermal Image Camera Rugged Box with handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sized to accommodate the foam insert that comes in the Guide PC210 cardboard box. I added a print-in-place carry handle
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 38
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the case and lids separately. (Latches can be printed with either) The lid does not require support and can use adaptive layer height. The case does, due to the print-in-place handle. I used Orca Slicer's auto tree supports, which are not compatible with adaptive layer height so the height was fixed at .2mm. Wall layers set to 5, infill set to 30% for strength. Printed in PLA. Optional gasket should be printed in TPU or similar.