Sassy Bookmark
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.06 – €0.07 net (excluding VAT)
For file: DickNuts_0.15mm_PLA_MK3S_4m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.07 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 3.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Every felt liked being sassed by your bookmark because you cant remember which page you were on. Fret no more!
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Public Domain
Bookmark to make you feel bad about yourself.
If using the provided Gcode everything should be centered correctly, Print the file named “Dicknuts” in whatever color you'd like. After it's finished don't remove it from the bed but load another color to print “Frame” and print it. the single layer of the first print should not interfere with the bed leveling process and it will print around the first and bond the two together.
If using the STL's just make sure you Flip them and center everything to the zero point.