1 / 3
Voron Trident Y end stop Remix (Magic Phoenix MPX CBT)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of the MPX Y endstop to add more clearance for wiring.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 59
- Makes
- 0
- Views
- 770
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model requires the user to desolder the 90 degree JST connector from the MPX Y end stop PCB and solder in a straight JST connector. If that is above your skill level, this mod may not be for you. You will also need to trim the PCB a bit. When trimming be careful not to hit the chamber thermistor.
Also, be very careful when screwing the cover screw into the mount. The plastic on the left hole is very thin. Don't over tighten. The heat insert on the right screw remains to give added strength.