Mini Carbon Reactor for Aquarium
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mini Carbon Reactor for Aquarium put together with standard sized acrylic from amazon.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 85
- Makes
- 0
- Views
- 1,023
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Mini Carbon Reactor
Designed for in-sump use May Leak!! if used outside of sump.
You may be able to print a tpu oring for the lid to prevent it from leaking but it is still a risk to use it outside of your sump.
Instructions:
Cut 50mm acrylic tube in half & debur edges with sandpaper.
Cut 8mm acrylic tube to the following lengths:
1x 20cm
2x 5cm
Glue on Base& Lid Male to 50mm acrylic tube
Glue 5cm acrylic tubes in to Lid Female. Center tube should only be glued in halfway into the lid.
Amazon Shopping list
50mm OD, 2mm wall acrylic tube https://a.co/d/g1dPihy
8mm OD, 6mm ID acrylic tube https://a.co/d/1O84obA
Plastic Glue https://a.co/d/da2f3GZ
ABS or PETG filiment https://a.co/d/9ARKv7d
Cheap filter floss (gotta rinse this stuff before use) https://a.co/d/7gy9YM2