1 / 2
Ring Toss Pontoon Raft Tub Toy with Magnetic Targets — image 1
1 / 2

Ring Toss Pontoon Raft Tub Toy with Magnetic Targets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Play ring toss or knock down the target in the tub! Embedded magnets, no supports needed.

Rating
0 / 5
Likes
9
Downloads
37
Makes
0
Views
192
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

 Pontoon Raft Tub Toy

This tub toy is a Pontoon raft with corner posts held on by magnets. Great for ring toss, or knock the post into the tub. I suggest making two pairs of posts and rings, with each pair a different color. 

Recommended Print Parameters:

  • No Supports. Slicer may tell you otherwise, but you don’t need them.
  • Everything gets 4 perimeters. This is to help keep them water tight.
  • 0.15mm layer with .4mm nozzle. This also helps water tightness.
  • Multiple colors to keep the games fun.
  • See the Notes in the table below for specific details.
  • Check out this blog post for more information to help make all your tub toys water tight. 
    https://blog.prusa3d.com/watertight-3d-printing-pt1-vases-cups-and-other-open-models_48949/

The Parts

Quantity
to Make  
Part Name   Notes
    2FloatThese hollow floats are the pontoons.
    2ConnectorThese connect the pontoons together.
    4PostThese are “targets” for ring toss.
The magnet side is against the build plate. (The STL is oriented)
Pause at 4.30 mm to add magnet.
Consider different colors to match rings. 
Hint: Make one print file with two posts and two rings.
          Print it twice in different colors
    4RingConsider matching the color of the posts. See hint above.
    4ScrewThese attach the connectors to the floats.
100% Infill.
Big flat side on the build plate. (The STL is oriented)
Pause at 4.30 mm to add magnets.

 

Magnets:

You will need 8 neodymium magnets that are 10mm diameter, 3mm thick. I used these: 
https://www.amazon.com/gp/product/B0BP2VBT4W

You’ll see the pockets for the magnets when you slice. Put a pause at ~4.3mm for the posts and screws which require magnets. 

You need to be mindful about the orientation of the magnets. Here is a simple method to use. Get the 8 magnets in a cylindrical stack. Now they are all oriented the same. Using a permanent marker, put an X on the face of the first magnet. Slide that magnet off the stack and set it aside. Always mark the same side where you slid the magnet off the stack. Put an X on the next magnet and set it aside. Repeat for all magnets. Keep the magnets separated from each other until the marker is dry. (You don’t want to unintentionally transfer the X to the back side of a magnet). The X’s are all on the same pole of the magnet; it doesn’t matter if it is N or S.

When you print the Posts add the magnets with the X Down. 

When you print the Screws insert the magnets with put the X Up.  Remember to increase the infill of the screws to 100% when you slice.

Post Print Processing:

After printing the floats and screws, you should “exercise” the threads to remove any tiny blobs that may be in there. Be firm but gentle, they are plastic! ;-) A small drop of hand dish soap is a good lubricant while you exercise the threads the first time. The threads are pretty strong you just want to make sure they work well before giving the toy to a youngster.

Assembly:

Align the first connector to the float and attach it with a screw. Attach the second connector with a screw. Align the second float to the two connectors and screw it together. It’s child’s play! Now let the magnets stick the posts to the top of the screws and it is play time!

 

If you like ❤ this tub toy, print it and post your make! Leave a comment!

Tags