1 / 4
Remixed Nanoleaf DC power/Arduino case w/ easy wiring leaf — image 1
1 / 4

Remixed Nanoleaf DC power/Arduino case w/ easy wiring leaf

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Created a new power box w/ cover and remixed the base a bit to remove the bar across the wiring pass through and add…

Rating
0 / 5
Likes
10
Downloads
33
Makes
0
Views
922
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution

Created a new power box w/ cover and remixed the base a bit to remove the bar across the wiring pass through and add bolt holes to secure the box to the leaf. Also added small notches to help center the LED strips in their installation locations.

Bolts together with M3 screws.

Lid is friction fit - stays in place when installed.

Two bases are included. One is for use with the box as mentioned above. The other is for use for all other leafs and I found easier to work with after removing the bar over the hole where your wiring will pass though.

Made to hold this Arduino unit D1 ESP8266 - https://www.ebay.com/itm/D1-Mini-NodeMcu-4M-bytes-Lua-WIFI-Development-Board-ESP8266-by-WeMos/192892550106

DC power jack - https://www.aliexpress.com/item/32997902659.html?spm=a2g0s.9042311.0.0.3a744c4dW4lHVg

DC power adapter ( 5v 3A ) - https://www.aliexpress.com/item/32911055744.html

Category: Electronics

Tags