Prusa MK4 Side Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
With limited space, I needed to move the front screen so I did not knock the printer during printing
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Warning
This models location will cover your side USB slot on the MK4.
(I use OctoPrint so I do not use the slot, so it does not effect me)
If you still need the USB you could use a (https://shorturl.at/ceHNQ) cable fitted to the USB slot before mounting the LCD.
Two files available:
1) MK4 Side Mount
This is the version I use, as (see main photo) the front of my MK4 overhangs the shelf, so the LCD can be below the level of the shelf.
2) MK4 Side Mount - Level
This is for cases where the LCD needs to be above the level of the shelf.
The 2nd print is not fully tested, so if it needs tweaking let me know and I will make any changes needed for people going forward.
Your going to need a couple of bolts and some sliding T-Slot nuts
(Look up user ‘motivierteSocke’ for good print files)
Printing:
On MK4 in non IS
PETG
15% Infill (gyroid) with no supports