Under-Desk Drawers (for smaller printers)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drawers inspired by Bennet Peters's design, but printable on a 200mm x 200mm bed
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 52
- Makes
- 1
- Views
- 242
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add some drawers under a couch-side table, but at the time the printer I had was a janky BIQU B1 with a 200mm x 200mm build area. I wasn't able to print Bennet Peters's drawers, so I designed my own using their design as an inspiration.
I made three sizes of drawers: 50mm, 75mm, and 100mm - the sizes correspond to the external height of the drawers, subtract 5mm (thickness of the floor) to get the internal depth.
The runner has four 3mm chamfered holes for wood screws.
Honestly, this isn't my best design, it's a lot thicker than I wanted it to be. When I made these, I was about to move, and was trying to use up the rest of the PETG I had. I would probably recommend searching for another drawer design over this one.