Andonstar Microscope LED/Flexilight Magenetic Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure to house the Andonstar flexible LED lights separately that allows magnetic attachment to a metal surface.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 43
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
DanAndersen remixed Arie Kanarie design for this fantastic mount but I'm already using a VESA adapter for the microscope and wanted to use the flexible LED lights with my metal soldering station. I added a few more steps to his Fusion 360/f3d file to extract just the light portion, removed the mounting slot and added some insert holes for 8mm X 8mm round magnets. It sticks solidly to the metal plate.
It's already noted in the main project but you will need to desolder the light wires from the main circuit board to remove them from the original plate. The lights themselves unscrew. Wrap a rag or washcloth around the base before you use pliers to prevent marring the finish.
This prints on my MK4 without supports and no additional hardware is needed other than the magnets.
Magnets: https://amzn.to/3T5WCWg (affiliate link) or search B09B3LKL5B if you want to bypass the small commission I receive.