Bosch GTS635-216 Zero Clearance Insert
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.60 – €4.40 net (excluding VAT)
For file: Zero Clearance Insert Bosch GTS635-216 v6 - Small Part_0.3mm_PETG_MK3S_3h5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.00 excluding VAT (range midpoint).
- Weight reported by the author
- 74 g
- Print time reported by the author
- 3.09 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces, but I've included an "un-split" stl also.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 222
- Makes
- 0
- Views
- 903
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Zero clearance insert for the Bosch GTS635-216.
I had to print in two pieces and glue them, but I've included an "un-split" stl also.
I added sections of 100% infill around the corners, the joint, and where the blade will cut through.
I did make a slot for the blade - but you will still need to raise your blade to cut it to final size - as you'd expect for any zero-clearance.
Slot for the riving knife works as-is.
Update: I have added new v6 f3d files - which has an extra 0.25mm clearance for one of the cutouts, and some extra supports at the bottom. These are not severe enough that I had to re-print (so I did not), but rather tweaks that will make it better next time…
After some normal and expected post-processing (Waxing the insert, adding some levelling screws, cutting the actual slot using the saw itself), it works great :-)