Voron Galileo 2 Extruder - PG11 Cable Gland Motor Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter plate that holds a PG11 Cable gland against the Galileo 2 motor.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 204
- Makes
- 1
- Views
- 1,716
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Sometimes you need a larger cable gland than the PG7/M12 version everyone uses. If your using a premade CAN cable and do not want to repin or cut your cable then this is for you. PG11 is just slightly too small for the LDO Nitehawk Cable. Drill it out and then pass the molex connector through the gland. PG12 or larger might be a better option.
Hardware :
- 4x M3 heatset inserts for standoffs.
- 2x M3 screws, Button head or socket, 6-12mm long.
- 1x 4" zip tie
- 1x PG11 Cable gland
Use longer screws if you have to when installing the motor to the Galileo 2. Then Screw the standoffs to the motor. The plate attaches to the other end of the standoff.
Edit 2024-03-18 : Added the PG 11 Motor mount. This could probably use more refinement.