Scraper for Prusa Mini Build Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This scraper can be used on the build plate with little danger of scratching the coating.
- Rating
- 4.923 / 5
- Likes
- 79
- Downloads
- 383
- Makes
- 14
- Views
- 2,862
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
This was inspired by a similar print from Kaje, but is adapted to the dimensions of the Prusa Mini's bed.
Another difference is that I use a movable blade so that it allows an angle of approximately 30 degrees of the handle.
To make it look more stylized, a surfase/fases drawing was used which simplifies the process of designing curved shapes.
Finishing the impression of the external walls is achieved with the experimental option of the Prusa Slicer Alpha 2.4.1 fuzzy skin and two colors.
The OnShape 3D CAD file for this are available here:
Print instructions
Print with the flat side down with a 15% infill, the gcodes (PLA or PETG) are ready to ask for the filament change when there are approximately 30 minutes, which in the Prusa Mini is very simple to do manually since it manages the process of extracting the old filament and purging the new one.