DIY-tracks for Playmobil Railway
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PM-track made DIY, including clips and a 2nd radius curved track, as well as half-length.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 218
- Makes
- 2
- Views
- 1,383
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If I had had a 3D printer when I had little boys, I definitely would have printed tracks for their Playmobil train. Now my boys are grown up, but before I sell the whole Playmobil, I thought I would construct the tracks so that others could enjoy them... Here are straight and curved tracks in standard and half-length and especially there is a 2nd radius curved track, so you can create double curves, what is not possible with the original track range available.
Before printing, please consider to buy original parts new or especially used ones… not only why I will soon sell my not longer needed tracks, but also why the original tracks are still of better quality and used ones are often offered on ebay for less price, than 3d-printing would cost. Still you can find here tracks that are not offered as original PlayMobil-track.
Have fun printing and playing.
Please note:
“Playmobil” is a trademark of geobra Brandstätter Stiftung & Co. KG, Germany and is used for reference only. The presented design here is neither supported nor authorised by the before mentioned trademark holders.