Bandsaw Template Guide
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.21 – €0.26 net (excluding VAT)
For file: Bandsaw Template Guide T Track insert_0.4n_0.2mm_PLA_MK4IS_17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.24 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 16.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This model will attach to your bandsaw and allow you to cut precise curves around a template for flush trim router after
- Rating
- 5 / 5
- Likes
- 57
- Downloads
- 145
- Makes
- 2
- Views
- 1,418
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted a guide to help me use the bandsaw to cut out curves more accurately. Instead of following a line drawn on the wood I place a template on the surface, the guide follows that template exactly. This uses 1 Magswitch GripRight 90 https://magswitch.com/collections/new-products/products/magswitch-magmount-150-gripright-90-degree-switchable-magnet and:
2 M5x5 Flathead bolts
4 M4x25 Sockethead bolts
3 M4 Flangenuts or regular M4 nuts
You could also just mount this guide on a block of wood and clamp it to your bandsaw table. The height of the guide adjust with one M4 bolt that I used a knurled knob on from this user ( https://www.printables.com/model/441885-knurled-m3-m8-thumbscrews-no-support ) The tip is easily replaceable in case you slice it with the bandsaw. Everything prints without supports. Happy Printing!
PS If you want taller TTrack all the parts fit perfectly in the Rockler T-Track.