Makita banding trim attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an attachment for the Makita trim router for edge band trimming.
- Rating
- 0 / 5
- Likes
- 201
- Downloads
- 663
- Makes
- 1
- Views
- 5,135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is an attachment for the Makita trim router for edge band trimming. It is designed to use with a 0.5" bit. The mounting plate allows for micro-adjustments to allow for a perfect trim. I use a bullnose router bit to avoid an edge caused by the straight bit.
For safety, the router bit is completely covered. There is a small opening that allows the shaving to escape.
To install, replace the router soleplate using the same screws.
If the amount of trimming is significant then I suggest you lift the motor end slightly and take several light passes before you do a final 'flush' pass.
This tool requires two hands to operate safely, therefore the routing object needs to be fastened down.
Please like and post a make!
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: No
Resolution: 0.2
Infill: 20%
Filament: Filament One ASA gray
Notes: this needs to be strong so use at least 5 layers. I chose ASA filament because of its strength. PETG could be used.
No supports are needed, print at presented.
How I Designed This
Fusion 360
Category: Parts