SMW Fixture Plate Plugs (1/4" and M6)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D-printable fixture plate plugs for 1/4" and M6 Saunders Machine Works fixture plates!
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 232
- Makes
- 1
- Views
- 851
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
These 3D-printable fixture plate plugs are compatible with our ¼" and M6 fixture plates.
The plugs are designed to easily slip into the threaded fixturing holes and have a single Higbee-start thread at the top allowing the plugs to tighten in place with only a single turn of a hex wrench (1/8" for ¼" plugs and 3mm for M6 plugs). The small tapered head bottoms out just below the top of the fixture plate for a clean look that won't affect your parts and fixtures. Plugs should only be lightly snugged, otherwise the single thread will strip.
We recommend printing with the hex- or slotted-side down and a layer height smaller than 0.10mm for best results (0.08mm seems to be ideal for the fine details of the thread). We do not recommend printing with a nozzle larger than 0.04mm. A 2mm brim and/or glue stick can help with bed adhesion.