1 / 3
OpenSCAD Vise mounted Metal stamping dies
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stamping dies to create various shapes for metalwork, should work for truck beds or a stepover flange
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 86
- Makes
- 0
- Views
- 747
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Metal stamping dies I originally designed to create patch panels for the floorboards in my car. SCAD should also work for any similar patterns - other floor boards, truck beds etc.
includes dies for
- ridges like you would find in a truck bed
- SCAD has options to create using base width and angle OR base width & top width
- a stepover flange for lap joints - with a stop to set flange depth
Additional dies TBD
I printed with 10 walls & 75% cubic infill.
0.6mm nozzle, so perimeters probably thicker than usual
Defaults to 8*2 mm round magnets, but magnet size can be changed in scad. Can also be changed to square magnets