Beast Blender Blade Storage and Cover
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.72 – €5.77 net (excluding VAT)
For file: Blade Holder_v2_0.4n_0.2mm_PLA_MK4IS_5h14m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.25 excluding VAT (range midpoint).
- Weight reported by the author
- 66 g
- Print time reported by the author
- 5.23 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Beast Blender blade storage and cover to manage the exposed blade system. Mounts on top of the base with blade storage.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 21
- Makes
- 1
- Views
- 171
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
We have a Beast Blender. The exposed blade system bothers me. I don't like it lying around, nor should it ever be mounted on the blender without one of the jar attachments (if you have one, you likely understand), however with a jar attachment it can't dry!
So, I made a stylish holder for it that sits on the base, and supports the blade system sitting upside down on top. It provides plenty of airflow to allow the blade to dry, keeps them protected, and provides a home for it that isn't crazy dangerously mounted on the base. I'm of the opinion something like this should come with the unit to promote safe blade storage.
There's a floor internally to provide a drip tray that keeps the water from ending up on the actual blender. It was designed to print with no supports, and does so perfectly fine.
I included a 3mf and mk4 gcode file that worked well for me. I used variable layers to improve the appearance of the hexagon pattern, and an added shape to make sure the infill density was sufficient for the small hexagon structures. My first print attempt had them fail because the internal structure wasn't present. Increase the local infill density resolved it.
A 0.15 layer height and 25% infill should work well. If anyone has problems, let me know.