1 / 1
M.C. Escher's Hand with Reflecting Sphere - HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
M.C. Escher's Hand with Reflecting Sphere made with HueForge
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 71
- Makes
- 0
- Views
- 397
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Overture Cement Gray Transmission Distance: 0.6
PLA Overture Light Gray Transmission Distance: 0.7
PLA Paramount 3D White Transmission Distance: 11
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Charcoal Black
At layer #10 (0.88mm) swap to Cement Gray
At layer #14 (1.2mm) swap to Light Gray
At layer #18 (1.52mm) swap to White for the rest.