Extrusion Ruler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extrusion Ruler for the SV06, SV06 Plus. Should work on any direct drive extruder though.
- Rating
- 4.5 / 5
- Likes
- 8
- Downloads
- 167
- Makes
- 2
- Views
- 472
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is an extrusion ruler I designed for my Sovol SV06, SV06 Plus. It can work with the SV07 as well, if you remove the extruder cover and likeley many other printers.
It was inspired by this video on e steps calibration on the SV06 Plus. https://youtube.com/watch?v=2qtnVakKPKg&si=_vgQrcRi_rYz-aIZ
You mark your fillament with a sharpie using the top hole. Then extrude 50mm or more and compare it to the ruler. The ruler starts at 50mm and goes to 120mm. With longer markers every 10mm. The 100mm marker has a dot on both sides for quicker locating.