1 / 2
Mercedes W164 B Pillar Trim Caps (front doors) — image 1
1 / 2

Mercedes W164 B Pillar Trim Caps (front doors)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Printable caps to fill the gaps left when the original plastic deteriorates or gets damaged.

Rating
0 / 5
Likes
7
Downloads
112
Makes
0
Views
659
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

The little plastic caps that close off the top of the B pillar trim on the front doors of my W164 ML350 Mercedes were missing, and the sole replacement I was able to source at the local dismantlers was disintegrating in my hands while I tried to extract it.  But, enough was left that I could model a replacement/substitute part.  Not perfect but better than the gaping opening that was there before.  

Print in ABS/ASA or PETG but not PLA, it won't hold up in the sun.  I smoothed the visible surface a bit with some acetone on a paper towel and used a little daub of clear adhesive on the back to install.  Test fit in case you need to file a little, what worked on my car may not work on yours.