1 / 4
Segmented box with spout and lid for honeycomb storage wall system (HSW) — image 1
1 / 4

Segmented box with spout and lid for honeycomb storage wall system (HSW)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€2.72 – €3.33 net (excluding VAT)

For file: HSW_BoxWithLid v6_0.2mm_PETG_MK3S_2h50m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €3.03 excluding VAT (range midpoint).

Weight reported by the author
45 g
Print time reported by the author
2.83 hr
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Segmented box with spout (front only) and lid for honeycomb storage wall system (HSW)

Rating
0 / 5
Likes
17
Downloads
121
Makes
0
Views
554
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

Segmented box with spout (front only) and lid for honeycomb storage wall system (HSW).

I use this for my filament clips but it's good for any small objects.

It needs two “empty-insets” to be fixed to the HSW.

The hinge parts are quite delicate. I recommend to dial down the speed a bit for the hinges on the box to facilitate cooling (e.g. with range hight modifier, see 3mf). Additionally printing with variable layer height may be a good idea, because the hinges need more detail than the rest (also, see 3mf). 
Note that the lid has two different sides, it needs to be snaped to the box with the flat side down (like on the build plate).

I printed this with PrusamentPETG.

UPDATE: There is also a bigger version and the step-file included (don't try to slice and print the step-file, since the lid is placed where it belongs and is not printable in this configuration).

UPDATE: If you do not like the separator, Thorb took care of that here.