Honey comb adjustable xz mini prusa leg stabilizer Compatible with the MINI BASE or stock form!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I originally used a xz adjustable leg, I finally printed the Mini Base and Installed. So I Made This leg to accommodate
- Rating
- 4 / 5
- Likes
- 24
- Downloads
- 94
- Makes
- 1
- Views
- 1,810
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
One of my first prints for the mini was the xz adjustable leg https://www.prusaprinters.org/prints/40128-prusa-mini-xz-support for my mini. The support worked very well for stability. I printed and installed the Mini Base add on So I designed this to better suit the MINI base add on or stock mini prusa form, and gave it a honeycomb look to better suit my appeal. I used a 3x40mm bolt from top of head to threads with one washer for bottom hole and a 3x25mm from top of bolt to threads with 5 washers for top hole.. it's all i had.