1 / 2
Synology DS218+ vibration-dampening legs
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Legs that fit snuggly underneath a Synology DS218+, reducing its contact area and lowering vibration noise.
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 63
- Makes
- 1
- Views
- 752
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
My first model, simple and overkill, but effective. Takes about 1.5 hours to print, print two for both ends.
Print in TPU without supports, with the following parameters:
- Material: CR-PLA_1.75
- Layer Height: 0.15mm
- Wall Line Count: 3
- Top Layers: 8
- Bottom Layers: 3
- Infill Density: 40%
- Infill Pattern: Honeycomb
- Print Speed; 100mm/s
- Printing Temperature: 225c
- Build Plate Temperature: 50c
- Retraction Distance: 2mm
In the files you'll find a txt file, change its file extension to .cxprofile and import into Creality Print slicer to have the above preselected, or print the .gcode directly.