1 / 2
AMVR Stand Arm Replacements for Quest 3 Controllers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement for the arms on the old AMVR stand to mount Quest 3 Controllers
- Rating
- 4 / 5
- Likes
- 21
- Downloads
- 137
- Makes
- 1
- Views
- 1,883
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Virtual Reality
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacements for the original controller mount arms on the old AMVR headset stand to use it with Quest 3 controllers.
Note: If you use the step files, mirror both parts along the Y axis to get the counterparts for the right controller.
IMPORTANT: Make sure your slicer does not add supports inside the holes of the controller mount parts as they are impossible to remove. If your slicer does that add support blockers inside the screw holes.
Materials Needed
- 4x M3x12-16 countersunk screws
Print parameters
- 0.2mm Layer Height
- 3 Walls
- 15% Infill
- Supports recommended (I used Tree)
- Brim recommended (I used Mouse Ears)