SuperVolcano & SuperVolcano² Upgrade Kobra 2 Max
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is what you need to upgrade your Kobra 2 Max to SuperVolcano(²)
- Rating
- 0 / 5
- Likes
- 29
- Downloads
- 76
- Makes
- 0
- Views
- 2,752
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Anycubic Parts & Upgrades
- License
- Creative Commons — Attribution
Parts list:
- Heatblock
1x supervolcano heatblock (& silicon sock)
You can (re)use the Kobra 2 Max 60W heating rod. - Heatbreak
1x heatbreak for Anycubic Mega pro / Vyper
The heatbreak of the Kobra 2 Max is not compatible with standard nozzles, so you must change it.
If it fits your temperature need, consider buying a "standard" bore 4.1mm heatbreak and put some capricorn XS PTFE tube to it. It has a bigger connection tube between cold- & hot-end as the bi-metal heatbreaks and therefore is more stiff. Reducing flex of the huge heatblock & nozzle improves the printing precision.
4.1 bore heatbreaks for the vyper are hard to find nowadays, but you can buy one for "CR6 SE / Ender 3 neo / CR10 smart" and cut off 3mm on the cold side. - Nozzle adapter
1x supervolcano adapter for normal RepRap/V6 nozzles
Without it, you would be limited to supervolcano nozzles - Nozzle
At least one RepRap/V6 nozzles of your choice. Maybe try a CHT and go SuperVolcanoCHT! - Autobed level (ABL) sensor / probe
- 1x ABL-Sensor-Extension.stl printed standing upright with organic stands on the hotbed
- 1x Screw M3 countersunk 12mm
- 1x Nut M3
- 4cm cable extension with JST PH 3pin plug & socket (3cm cable + plugs) - Thermistor
You can (re)use the Kobra 2 Max thermistor and mount it on the heatbreak side of the heatblock
I tried attaching the thermistor to the nozzle side of the heatblock, but that is not a good match for the logic of the Kobra 2 Max. When 100% fan kick in, it cools the thermistor at the noozle side too much and an abnormal heating error pops up and ends your print - Fanduct
1x Kobra_2_Max_fanduct_SuperVolcano.stl printed with organic stands on the hotbed
The normal heatblock of the Kobra 2 is 20mm height, a supervolcano heatblock is 50mm height. Therefore the fanduct is 30mm longer then the original. - Software
As your printhead gained 30mm in height now, you have to reduce your max z height from 500mm down to 470mm
What is SuperVolcano² ?
You fit a Volcano nozzle to the supervolcano adapter - et voilà, SuperVolcano²
My reason for this: I print with a 1.5mm nozzle, which is easily available as Volcano CHT clone, but hard to find in V6.
Part list changes for Supervolcano²:
- Nozzle
At least one Volcano nozzles of your choice. Maybe try a CHT and go SuperVolcano²CHT!
Deluxe: 2x M6 copper nut (made of pure copper, not only copper plated) to "enlarge" the heatblock over the 10mm naked nozzle thread - Fanduct
1x Kobra_2_Max_fanduct_SuperVolcano².stl printed with organic stands on the hotbed
The normal heatblock of the Kobra 2 is 20mm height, a supervolcano heatblock is 50mm height. A Volcano nozzle has 10mm more thread then a normal v6. Therefore the fanduct is 40mm longer then the original. - Software
As your printhead gained 40mm in height now, you have to reduce your max z height from 500mm down to 460mm
Although I supposed CHT must be useless on a supervolcano, it makes a huge difference in print quality with exact the same settings. Compared a steel/TC4 1.5mm vs a 1.4mm Bondtech CHT, both V6. Bondtech did absolut perfect print with PET-G @ 65mm³, steel/TC4 was "useable". More mm³ are possible, but print quality suffers.
Let it flow!