M-LOK Micro Hand Stop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple hand stop that attaches with 2 screws and T-nuts (sold separately). Designed and modeled in AutoCAD.
- Rating
- 3 / 5
- Likes
- 18
- Downloads
- 149
- Makes
- 2
- Views
- 573
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Print:
The only supports needed are at the bottom of the the grip and the counterbore areas near the top. The ceiling of the hand stop is conical so it will print fine with overhang. Use the Smart fill option of the paint on supports setting, and use organic supports.
Once printed, remove supports and then install using the standard M-LOK installation procedure.
If printing in resin, use auto supports and add extra supports around the hole in the counterbore and use an offset from the build plate at least 5mm.
FDM Settings:
Nozzle - 0.4mm
Layer Height - 0.15mm
Extrusion Width: 0.40mm
Infill- User Preference
Filament - Prusament PC Blend
Dimensions:
