Sample Swatch Square for Easy Labeling
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.27 – €0.33 net (excluding VAT)
For file: Swatch_PETG_0.15mm_PETG_MK3S_21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.30 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 21 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple square swatch for easy labelling and cataloging of filaments.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 55
- Makes
- 1
- Views
- 439
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I loved the design of this and didn't need all the detail in other swatches such as bridging etc.
These were perfect for my needs however I wanted to at least store the material, colour, print temp and filament make on them for easier identification.
I already had a label maker so I thought I would modify this design to work with that. For the labels I used a brothers label maker with 24mm tape in it and just the default settings. The labels largely come out square at 24mm x 26mm and fit nicely in the little indent.
I hope these are useful for someone else who wants to catalogue their filaments in a similar manner.