Yet Another Hidden Headphone Hanger ( YAHHH ) V2 Big headphones friendly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A slight redesign of my Yet Another Hidden Headphone Hanger, now with STEP file !
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
It took me a while to post it, but here is a new version of my hidden headphone hanger.
The design is based on V1 that you can find here => https://www.printables.com/model/403257
The most notable difference is a slight lip at the edge of the hanger, preventing your precious headphones from falling (ask me how I know…). I also added a slight inset where the screw head will sit once mounted.
As V1 was made in AutoCAD, I re made it from scratch in Fusion 360, if you want to remix it, the STEP file is included. There are still a few sharp edges, but none that could damage your headphone's headband.
It can be mounted under anything, with any 3mm screw, but countersunk ones were in mind when I designed it. A passthrough hole for your screwdriver is baked into the model.
Printability shouldn't be a problem for anyone. I printed mine in Sunlu PLA+ with a .4mm nozzle, 60° bed temp, 215° hotend temp.
Print settings I used for mine :
- .2mm layer height
- 3 walls ( 1.2mm )
- 3 top/bottom layers
- 15% infill, any type should be fine
- No supports
- 3 skirt lines, no brim
Feel free to share your makes for all of us to see your daily used set of cans !