Michigan State University Coaster - Sparty
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Michigan State University coaster with Sparty on it. This was originally shared by Leejy936 on Thingiverse.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 146
- Makes
- 0
- Views
- 374
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is a coaster for the Michigan State University fan in your life! This was originally made by Leejy936 on Thingieverse.
I printed this with 15% infill using Bambu Labs Basic PLA in Bambu Green and Jade White. You can print this coaster with:
- 15-20% Infill
- 0.2 Resolution
- No supports needed
- I did not need a brim
- Optional: For two color prints, add the pause/color change on the 21st layer
I also shared my .3mf files that will print four coasters and it includes the pause to change the filament from green to white or white to green. If you would like to create this yourself, you will need to add a pause on the 21st layer to switch filament. I printed this on a Bambu X1C printer.
One coaster took me just over 30 minutes to print. 4 coasters with color change took me just over 2 hours to print.
I purchased self-adhesive round cork coaster backing off of Amazon to finish them off.
Thanks Leejy936 for your great design!